Today is probably going to be another easy one, but I threw it together pretty quick. We’re using the same topology as last time. Same issue, users cannot communicate, but different problem.

You can run the .net on your own Dynamips server or you can use mine. Run the topology and login with username “tshoot” and password “tshoot”. This user only has privilege level 1, so show commands will be available, but show run will not be. You can also login with username: “shrun” and password: “shrun”, this will print the running config and boot you out. I would like to grant full privilege 15 access, but I’m worried about people messing with the configs, this is after all a public post. Obviously you could get around this pretty easily, but that would defeat the purpose. ;)

Here’s our topology:

(Click for fullsize)

I’m attaching the .net file with the configs saved inside.
The Troubleshooting Lab #4 .net file
(Don’t forget to change your paths)


Colby Glass has been in IT since 2002. He is currently a Systems Engineer (presales) with a Cisco Gold partner and holds the CCNP R/S, CCNP DC, CCDP, CCIP, JNCIA-ER.

More Posts